Engineered to comply with EN 15512 standards, designed for the high-density space challenges of the Paris industrial corridors.
The Île-de-France region, with Paris at its core, represents the most critical logistics and industrial gateway in France, managing over 15 million square meters of warehousing stock. As e-commerce penetration rates climb across continental Europe and urban distribution initiatives like the "Grand Paris Express" reorganize commercial traffic, the pressure on warehouse floor space in Seine-et-Marne, Val-d'Oise, and Essonne has reached unprecedented levels. Industrial developers and 3PL operators are facing skyrocketing land prices, urging a decisive shift from horizontal expansion to vertical volume optimization.
In this high-cost real estate climate, implementing high-density heavy storage shelves and multi-tier mezzanine floors is no longer optional—it is a baseline competitive requirement. Standard pallet layouts are being replaced by dynamic systems engineered for maximum height utilization, strict safety compliance under European norms, and compatibility with automated material handling equipment (such as AGVs and reach trucks). For Parisian procurers, selecting a global manufacturing partner who understands both the rigid EN standards and local supply chain dynamics is key to safeguarding project ROI.
Parisian logistics parks—ranging from class-A facilities near Charles de Gaulle Airport to older urban brownfield depots in Saint-Denis—exhibit diverse spatial constraints. Heavy-duty pallet racking systems imported into these facilities must address specific structural demands. Modern facilities utilize clear heights of up to 12 meters, requiring upright frames that maintain structural integrity under massive vertical loading and dynamic forces from forklift impacts. In historical urban distribution units, lower ceilings force the use of custom double-sided mezzanine systems to construct new floor areas without modifying the building envelope.
Furthermore, safety regulations in France (enforced by CARSAT and INRS) mandate strict risk prevention. Racking collapse risks are mitigated by installing impact protection barriers, heavy-duty row spacers, frame bracing systems, and load safety locking pins. Our heavy-duty racking configurations are constructed with high-grade carbon steels, such as Q355B (equivalent to European S355JR), providing the ultimate yield strength needed to construct high-bay warehouse configurations safely and reliably.
A technical baseline of our heavy storage systems designed for French and international logistics markets.
| Structural Component | Standard Specifications | Paris Project Applications |
|---|---|---|
| Upright Frames | 80mm to 140mm width / 1.8mm to 3.0mm thickness (Cold-formed steel) | Heavy-duty upright profiles designed for high-bay operations in Clichy and Gennevilliers. |
| Load Beams | Box beams (80x50 to 160x50mm) / Step beams with safety lock pins | Configured for standard Euro-pallets (800x1200mm) and industrial pallets (1000x1200mm). |
| Surface Finish | Electrostatic epoxy powder coating, cured at 200°C (ISO 9001 certified) | High resistance to humidity, scuffing, and chemical exposure in pharmaceutical/cold chain units. |
| Seismic Compliance | Designed according to Eurocode 8 structural analysis criteria | Ensures seismic compliance for French zones of low to moderate seismicity. |
Established in 2015, Shenzhen Runda Racking Manufacturing Co., Ltd. is a premier manufacturer specializing in heavy-duty industrial shelving and high-density warehouse storage solutions. With over 11 years of deep industry expertise and 9 years of active global export experience, we deliver tailored racking systems to logistics hubs, distribution centers, and manufacturing plants worldwide. Operating from a modern 35,000 square meter production facility, our operations are powered by a robust network of over 1,200 trusted supply chain partners. This enables us to achieve an annual export turnover of $28 million. Our primary markets span North America, Western Europe, Southeast Asia, and the Middle East, where we proudly serve industrial distributors, large-scale third-party logistics (3PL) operators, and direct enterprise buyers.
Quality and innovation drive our core philosophy. We maintain strict quality control through full-process sampling inspection, raw material stress testing, and load-bearing verification, backed by a dedicated team of 35 QC professionals. Innovation is led by our 18 experienced R&D engineers who continuously refine structural efficiency—releasing over 120 new and upgraded storage products last year alone. We offer comprehensive OEM/ODM and full custom manufacturing services, including tailored load capacities, custom dimensions, corrosion-resistant powder coatings, and specialized seismic structural designs. Supported by our experienced international trade background, Shenzhen Runda provides seamless end-to-end service, from technical layout design to reliable global shipment execution.
Information Gain Note for Paris Procurement Executives:
Unlike standard trading brokers, our factory controls the production value chain end-to-end. By applying cold roll-forming lines with online punching and continuous CNC bending, we guarantee dimensional tolerances below ±0.5mm, preventing structural misalignment during installation in high-bay automated warehouses in Europe.
From raw structural steel coils to finished powder-coated heavy storage systems, view our precise manufacturing stages.
In France, the design, execution, and inspection of commercial storage systems are subject to strict regulations. The standard EN 15512:2020 acts as the regulatory benchmark for steel static storage systems, governing the structural design of adjustable pallet racking. Any factory exporting to Paris must supply structural calculations verifying safety under various loading conditions, vertical deflection limits, and lateral stability parameters.
Furthermore, Eurocode 3 (EN 1993) sets down design guidelines for the structural safety of steel structures. In seismic areas of France, Eurocode 8 (EN 1998) defines calculations for industrial shelving units to withstand seismic movements. At Shenzhen Runda Racking, our engineering team utilizes finite element analysis software to generate custom calculation sheets matching your building's seismic profile. This level of technical transparency ensures your racking project receives approval during safety Audits by French control authorities (such as Apave, Dekra, or Bureau Veritas).
When executing projects in Paris, we provide comprehensive documentation packages to ensure frictionless imports and local permits. This includes:
Sourcing directly from our heavy storage shelf factory in Shenzhen provides significant cost advantages. However, navigating global logistics requires a specialized strategy. Our dedicated logistics team coordinates container shipments from Yantian Port (Shenzhen) directly to European ports like Le Havre or Fos-sur-Mer. We maintain partnerships with major sea carriers to secure stable container allocations, minimizing delivery delays during peak seasons.
For custom clearances, we offer both FOB/CIF terms and DDP (Delivered Duty Paid) shipping solutions. Working with our network of customs brokers in France, we handle import customs procedures, pay duties, and deliver the materials straight to your job site in Paris or the surrounding region (Marne-la-Vallée, Cergy-Pontoise, Évry, etc.). Once delivered, we can connect you with experienced local racking installation teams to ensure your heavy-duty shelves are constructed, anchored, and certified to meet all French safety standards.
Discover our wide range of storage configurations, built using premium materials and optimized for durability.
The warehousing sector is moving rapidly toward automation. Modern facilities are transitioning from manual forklift loading to integrated systems like AS/RS (Automated Storage and Retrieval Systems), shuttle-based operations, and automated guided vehicles (AGVs). These automation technologies require racking structures with highly precise manufacturing tolerances. A slight structural warp or alignment issue can trigger sensor halts, disrupting automated workflows.
Shenzhen Runda Racking is staying ahead of this trend. We work closely with automation providers to engineer heavy storage systems with tolerances below 1mm. By using premium raw steel and advanced roll-forming machinery, our structural systems are designed to integrate seamlessly with shuttle carriers and robotic vertical cranes. This helps Parisian warehouse operators future-proof their storage facilities and maximize operational efficiency.
Answers to common engineering, logistical, and compliance questions about shipping heavy storage systems to France.
Yes. All of our heavy-duty warehouse storage systems and steel platforms are designed to comply with European standard EN 15512 and CE requirements. We provide complete calculations and material specifications to support compliance audits during installation.
Production generally takes 20 to 30 days depending on the volume and customization needs. Sea transit from Shenzhen port to Le Havre takes around 30 to 35 days, followed by 2 to 3 days for local customs clearance and trucking to your Paris site.
We offer comprehensive OEM/ODM services. We can adjust column profiles, beam dimensions, and load capacities. Our automatic powder coating line supports custom RAL colors to match your corporate brand guidelines.
We verify performance through strict raw material testing, physical load testing of beams, and frame compression tests. We also use calculation methods from European FEM standards (Fédération Européenne de la Manutention) to ensure safety margins.
Yes, we can arrange DDP shipments where we manage the import customs clearance, import tax processing, and local transport. This provides a direct, door-to-door delivery process for our clients in the Paris region.
We supply a complete documentation package, including layout designs, capacity ratings, structural calculation data sheets, assembly instructions, and CE/ISO declarations of conformity.
Work directly with our factory design engineers to optimize floor space, ensure full local compliance, and reduce procurement costs.
Send Inquiry Now
Runda Racking